- Test 4 detectors at one time
- Easy 1 button operation
- Robust rechargeable internal battery, up to 1500 tests before
recharging
- Internal gas cylinder regulator and pressure gauge
- USB flash memory for bump test and event log storage
- Optional detector configuration and firmware updates via GCT Manager
Software
- Rugged case or Wall Mount Dock case
- No computer required to operate
Detector Configuration/Firmware Updates: In order to keep
your fleet of gas detectors compliant with specific settings, we allow
for the MGC Dock to program each detector during either bump testing or
calibration. The programmable fields are as follows: User ID,
Calibration Interval, Bump Interval, Self-Test Interval, Low Alarm, High
Alarm, Show Sensor Readings, Hide Bump Due LED and Hide Clock. For
example, if your company or facility requires each detector on site to
have specific alarm set points and a bump test interval, instead of
programming each detector individually, the instruments can be group
programmed while simultaneously bump testing (4 detectors at a time per MGC
Dock) using our GCT Manager software. As firmware updates become
available, we can program each MGC Dock to update detectors during bump
testing and calibration. Facility safety standard compliance for single
gas detectors is now easily achievable.
Event Data and Record Storage: In addition to performing
tests, detector configurations and firmware updates, the MGC Dock also
stores important information about both the docking station and detectors
tested. All tests performed on the docking station can be accessed from
either the USB directly or using the GCT Manager software. Each bump
test and calibration event is recorded and logged by date, time and
serial number. Along with the test records, the individual event logs
from each detector are saved. At the time of the test, the detector
transmits its’ event log to the memory. By default, the station will
save the previous 10 event logs.
MGC Dock Wall Mount: Gas Clip Technologies offers a wall
mount solution for our MGC Dock. Instead of being housed in a case, we
provide a slim cabinet type case that can be easily mounted on
a wall. This option can be selected at the time of order or can be
ordered separately to convert your existing MGC Dock to a Wall Mount MGC
Dock. This option is a perfect fit for facilities or office
environments.
Gas Clip Technologies GCT Manager software provides users the ability to
communicate and program the MGC Dock or Wall Mount MGC Dock via IR Link
or USB memory stick. In order to communicate with an MGC Dock system via
infrared, an IR Link is required. Following is a full list of
programmable features offered when communicating with the MGC Dock or
Wall Mount MGC Dock using the GCT Manager Software via the IR Link:
- Docking Station Location
- Number of Event Logs
- Auto Power-Off Time
- Gas Cylinder Expiration Date
- Gas Cylinder Lot #
- Gas Cylinder Concentration
- Feature Administration Controls
- Station Test Logs
- Individual Instrument Logs
- Inventory Report
- All IR Link Software features*
*System Requirements: Available for Windows© based PCs
(XP, Vista, Windows 7) ; Users must also install Microsoft Net 4.0
software.