Multi Gas Clip

Part# MGC
Multi Gas Clip Infrared Front
Assembled in the U.S.A.
Sold through distributors worldwide.

NOTICE:

The Multi Gas Clip Pellistor has been discontinued and is no longer available.

Battery life for months instead of hours!

Day in, day out, your workers have to charge their portable multi gas detectors so they can keep testing for the presence of hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL). Unfortunately, sometimes they may forget to do so. Gas Clip Technologies can help prevent this safety risk with our new Multi Gas Clip (MGC).

The new MGC can go a full 2 months without a charge, even without ever having to be turned off. Shut down the detector nightly and the battery can last up to 4 months.

How is this accomplished?

What’s the secret of the MGC’s extended battery life? It uses low-power photo-metric technology for the detection of the combustible gases (LEL). Instead of draining the battery with archaic pellistor technology, the MGC uses an IR source. This conserves power, so the battery lasts and lasts and lasts.

What about calibration?

The MGC also eliminates the need to frequently calibrate portable gas detectors. It can go 12 months without being calibrated. That saves time and increases efficiency.

  • 2 month battery life (continuous run time)
  • 1 year calibration cycle
  • Will work in inert environments, no need for oxygen
  • Simple to use
  • Bump/Calibration reminders
  • Docking station compatible
  • Programmable user ID
External Pump
Detector(s) sold separately.
External Pump
Part#: GCT-XP
The External Pump gives any Gas Clip diffusion detector the ability to take remote samples from up to 75 feet away, drawing air at greater than one foot per second, and comes with a two-year warranty.
GCT IR LinkGCT IR Link linked to MGC detectorGCT IR LinkGCT IR Link linked to MGC detector
*System Requirements: Available for Windows© based PCs (Vista, 7, 8.x, 10 64 bit versions)
Detector(s) sold separately.
GCT IR LINK communication module with USB cable
Part#: GCT-IR-LINK
GCT IR LINK communication module with USB cable (for use with all GCT detectors

Pictured linked to an MGC detector
GCT IR Link USB Cable
GCT IR Link
USB Cable
Part#: GCT IR Link USB Cable
GCT IR Link USB Cable
MGC Charger
Detector(s) sold separately.
MGC Charger
Part#: MGC-CHARGER
MGC Charger replacement - 110v AC Adapter (for use with Multi Gas Clip Infrared & MGC Pump Infrared)
MGC Vehicle Charger
Detector(s) sold separately.
MGC Vehicle Charger
Part#: MGC-CHARGER-V
MGC Vehicle Charger – 12v DC Adapter to use with Multi Gas Clip, MGC Pump and the External Pump
MGC Dock
Detector(s) sold separately.
MGC Dock
Part#: MGC-DOCK
The Multi Gas Clip Dock is the perfect solution to bump test or calibrate up to 4 detectors at once.
MGC Wall Mount Dock
Detector(s) sold separately.
MGC Wall Mount Dock
Part#: MGC-WMDOCK
Multi Gas Clip Wall Mount Dock
The Multi Gas Clip Wall Mount Dock is the perfect solution to bump test or calibrate up to 4 detectors at once.
Multi Gas Clip High Pressure
Detector(s) sold separately.
Multi Gas Clip High Pressure
Part#: MGC-DOCK-HP
Testing dock in portable case with regulator, gauge, dock charger & USB memory plus high pressure regulator & hose (for use with MGC Infrared)
MGC Wall Mount High Pressure Dock
Detector(s) sold separately.
Multi Gas Clip Dock Wall Mount High Pressure
Part#: MGC-WMDOCK-HP
Testing dock in metal case with regulator, gauge, dock charger & USB memory plus high pressure regulator & hose (for use with MGC Infrared)
Dock High Pressure Conversion
Detector(s) sold separately.
Dock High Pressure Conversion
Part#: DOCK-REGCONV-HP
Conversion of any standard GCT Clip Dock to High Pressure (for all GCT Clip Docks - GCT labor included)
Dock Charger replacement
Detector(s) sold separately.
Dock Charger replacement
Part#: DOCK-CHARGER
Dock charger replacement - std. 110v power supply (for all GCT Clip Docks)
Confined Space Kit
Detector(s) sold separately.
Gas sold separately.
You can use any calibration gas cylinder as long as it has a C-10 connector.
Confined Space Kit
Part#: GCT-CSK
Hard sided carrying case with foam insert, 1' sampling probe, air stone particulate filter, 10' sampling hose, hand aspirator pump, 3' calibration/test hose with Quick Disconnect, calibration caps (Multi Gas Clip & MGC Simple/Simple Plus), 0.5lpm regulator and GCT IR LINK.
Confined Space Kit W/Gas
Detector(s) sold separately.
You can use any calibration gas cylinder as long as it has a C-10 connector.
Confined Space Kit with 58L Quad Gas
Part#: GCT-CSK-GAS
Hard sided carrying case with foam insert, 58L quad gas cylinder (25 ppm H2S, 100 ppm CO, 18% O2 & 50% LEL), 1' sampling probe, air stone particulate filter, 10' sampling hose, hand aspirator pump, 3' calibration/test hose with Quick Disconnect, calibration caps (Multi Gas Clip & MGC Simple/Simple Plus), 0.5lpm regulator and GCT IR LINK.

MGC Multi ChargerMGC Multi Charger
Detector(s) sold separately.
MGC Multi Charger
Part#: MGC-CHARGER-MULTI
MGC Vehicle Charger – 12v DC Adapter to use with Multi Gas Clip (Infrared), MGC Pump (Infrared) and the External Pump
Multi Gas Clip Hand Aspirator Kit
Detector(s) sold separately.
Hand Aspirator Kit for MGC Infrared
Part#: MGC-HAK
Hand Aspirator Kit for MGC Infrared - Probe, Stone Filter, Sampling Hose, Bulb & Calibration Cap (for use with MGC IR only)
Remote Sampling Probe - 1 ft.
Detector(s) sold separately.
Remote Sampling Probe - 1ft.
Part#: PROBE-1
Remote Sampling Probe - 1 ft.
Manual Regulator
Detector(s) sold separately.
Manual Regulator (non-dock use)
Part#: REG-MANUAL
Manual Regulator (non-dock use) use with all GCT detectors except MGC Pumps
Calibration Cap
Calibration Cap
Part#: MGC-CALCAP
Multi Gas Clip replacement (for use with MGC Infrared)
Calibration Hose 3 ft.
Calibration Hose 3 ft.
Part#: HOSE-3
Calibration Hose - 3 ft. Tygon ID-1/8" (3.18 mm), OD-1/4" (6.35 mm), Wall-1/16” (1.59 mm)
Alligator ClipAlligator Clip
Alligator Clip
Part#: AL-CLIP
Alligator Clip replacement (includes screw) (For use with all GCT Detectors)
Filter replacements - 10-Pack
Detector(s) sold separately.
Filter replacements
10-Pack
Part#: FILTER-10
Filter replacements - 10-Pack (for use with SGC, SGC PLUS, MGC & MGC-P)
Filter replacements - 50-Pack
Detector(s) sold separately.
Filter replacements
50-Pack
Part#: FILTER-50
Filter replacements - 50-Pack (for use with SGC, SGC PLUS, MGC & MGC-P)
LCD Screen Kit for MGC Infrared
LCD Screen Kit for MGC Infrared
Part#: MGC-LCD
LCD Screen Kit for MGC Infrared
MGC LEL Pellistor Sensor
MGC LEL Pellistor Sensor
Part#: MGC-SE-LEL-P
MGC LEL Replacement Sensor (Pellistor)
Sensor - LEL Replacement (infrared)
Sensor - LEL Replacement (infrared)
Part#: MGC-SE-LEL-IR
Sensor - LEL Replacement (infrared) for MGC Infrared & MGC Pump Infrared
Sensor - O<sub>2</sub> replacement
Sensor - O2 replacement
Part#: MGC-SE-O2
Sensor - O2 replacement for MGC Infrared
Sensor - H2S & CO Replacement
Sensor - H2S & CO Replacement
Part#: MGC-SE-4DT
MGC H2S & CO replacement (Dual-Tox) for all MGCs & MGC Pumps
MGC Battery
Detector(s) sold separately.
MGC Battery
Part#: MGC-BAT
MGC Battery Assembly
Air Stone Particulate Filters
Detector(s) sold separately.
Air Stone Particulate Filters
3-pack
Part#: MGC-PF
Air Stone Particulate Filters 3-Pack
Quad Gas Cylinder
You can use any calibration gas cylinder as long as it has a C-10 connector.
Quad Gas Cylinder
Part#: MGC-Q-58 / MGC-Q-116
Contains 25 ppm H2S,
100 ppm CO,
18% O2,
& 50% LEL (2.5% vol Methane.)
AVAILABLE in 58L or 116L
Remote Sampling Probe Filter & Gasket Replacement Set
Detector(s) sold separately.
Remote Sampling Probe
Filters & Gasket Replacement Set
Part#: PROBE-RF
Remote Sampling Probe Filter & Gasket Replacement Set
Remote Sampling Probe In-Line Water Trap Filter replacement
Detector(s) sold separately.
Remote Sampling Probe In-Line Water Trap Filter replacement
Part#: MGC-WT
Remote Sampling Probe In-Line Water Trap Filter replacement

Select the department to contact:

Select products to receive information: