ATTENTION! Beginning October 19, 2020 our new home office hours will be 8am - 5:00pm CST M-F

Single Gas Clip Plus

Part# SGC-P-H / SGC-P-C
Single Gas Clip Plus Front Single Gas Clip Plus Front
Assembled in the U.S.A.
Sold through distributors worldwide.

Longer Life with "Hibernate" mode.

The Single Gas Clip Plus (SGC Plus), is a maintenance free handheld gas detector with built in “Hibernate” mode for detecting hydrogen sulfide H2S or carbon monoxide CO. “Hibernate” mode allows users to place this disposable single gas detector in a rested state when not in use. The SGC Plus is perfect for seasonal/turnaround contractors or rental fleets. When your job or turnaround is finished, simply synchronize the instrument with our GCT IR Link or SGC Dock to put the detector in a rested state. When you are ready to use the detector again, simply press the power button to reactivate.

Use it when you need it.

By hibernating the detector when not needed, you can spread 2 years of use over a 3 year period. This mode can only be enabled via IR communication with either the IR Link or SGC Dock. Only authorized personnel can place the detectors in “hibernate” mode.

Rugged and configurable.

The SGC Plus also provides the most advanced maintenance free disposable single gas detector on the market. The SGC Plus combines a rugged design with and reliability and advanced sensor resolution (0.1 ppm for H2S models). This detector allows for quick configuration adjustments to comply with current and future industrial health and safety gas exposure regulations.

  • Unmatched sensor reliability for hydrogen sulfide (H₂S) or carbon monoxide (CO)
  • “Hibernate” mode
  • Adjustable alarm set points
  • Real-time gas reading capability
  • 0.1 ppm resolution for H2S sensor and display
  • Two-way IR communication for event downloads, bump tests, detector configuration and firmware updates
  • Programmable unique 6 digit detector identification
  • Bump Test notification and confirmation when intervals are set
  • Calibration optional
  • Calibration notification and confirmation when intervals are set
  • Docking capability with Gas Clip Technologies SGC Dock

Be sure to compare these features to our Multi Gas Clip and Single Gas Clip to find the right product for your current application.

SGC-Dock
Detector(s) sold separately.
Testing dock in portable case with gas compartment, regulator, guage, dock charger & USB memory (for use with SGC & SGC PLUS)
Click on the button above to view the product.
SGC-WMDock
Detector(s) sold separately.
Testing dock in metal case with gas compartment, regulator, gauge, dock charger & USB memory (for use with SGC & SGC PLUS)
Click on the button above to view the product.
GCT IR Link GCT IR Link linked to SGC-PLUS detector GCT IR Link GCT IR Link linked to SGC-PLUS detector
*System Requirements: Available for Windows© based PCs (Vista, 7, 8.x, 10 64 bit versions)
Detector(s) sold separately.
GCT IR LINK communication module with USB cable
Part#: GCT-IR-LINK
GCT IR LINK communication module with USB cable (for use with all GCT detectors

Pictured linked to an SGC-PLUS detector.
GCT IR Link USB Cable
GCT IR Link
USB Cable
Part#: GCT IR Link USB Cable
GCT IR Link USB Cable
Dock Charger replacement
Detector(s) sold separately.
Dock Charger replacement
Part#: DOCK-CHARGER
Dock charger replacement - std. 110v power supply (for all GCT Clip Docks)
Manual Regulator
Detector(s) sold separately.
Manual Regulator (non-dock use)
Part#: REG-MANUAL
Manual Regulator (non-dock use) use with all GCT detectors except MGC Pumps
Single Gas Cylinder - H<sub>2</sub>S
You can use any calibration gas cylinder as long as it has a C-10 connector.
Single Gas Cylinder - H2S
Part#: SGC-H2S-58 / SGC-H2S-116
Single Gas Cylinder - H2S - contains 25ppm H2S/N2 - Available in 58L or 116L
Single Gas Cylinder - CO
You can use any calibration gas cylinder as long as it has a C-10 connector.
Single Gas Cylinder - CO
Part#: SGC-CO-58 / SGC-CO-116
Single Gas Cylinder - CO - contains 100 ppm CO/Air - Available in 58L or 116L
Calibration Cap
Calibration Cap
Part#: SGC-CALCAP
Calibration Cap replacement (for use with SGC & SGC PLUS)
Alligator Clip Alligator Clip
Alligator Clip
Part#: AL-CLIP
Alligator Clip replacement (includes screw) (For use with all GCT Detectors)
Filter replacements - 10 Pack
Detector(s) sold separately.
Filter replacements
10 Pack
Part#: FILTER-10
Filter replacements - 10 Pack (for use with SGC, SGC PLUS, MGC & MGC-P)
Filter replacements - 50 Pack
Detector(s) sold separately.
Filter replacements
50 Pack
Part#: FILTER-50
Filter replacements - 50 Pack (for use with SGC, SGC PLUS, MGC & MGC-P)