Detector(s) sold separately.
External Pump
Part#: GCT-XP
The External Pump gives any Gas Clip diffusion detector the ability to take remote samples from up to 75 feet away, drawing air at greater than one foot per second, and comes with a two-year warranty.
Gas Cylinders
When calibrating your monitors manually or with the SGC Dock, MGC Dock, or MGC Simple
Dock, use NIST traceable gas provided by Gas Clip Technologies in either 58 or 116 liter
bottles.
Gas Cylinder Info
58L Aluminum
Pressure: 500psi
Gas Type: See below
Dimensions:
14.25\" x 3.53"
Water Capacity:
1.72 liters
Material:
Aluminum Alloy
Weight: 1lb 12oz.
Valve Inlet:
5/8"-18 UNF (C10)
Contents: 2 cu ft.
Pressure: 500psi
Gas Type: See below
Dimensions:
14.25\" x 3.53"
Water Capacity:
1.72 liters
Material:
Aluminum Alloy
Weight: 1lb 12oz.
Valve Inlet:
5/8"-18 UNF (C10)
Contents: 2 cu ft.
116L Aluminum
Pressure: 1000psi
Gas Type: See below
Dimensions:
14.3" x 3.5"
Water Capacity:
1.72 liters
Material:
Aluminum Alloy
Weight: 2lbs
Valve Inlet:
5/8"-18 UNF (C10)
Contents: 4 cu ft.
Pressure: 1000psi
Gas Type: See below
Dimensions:
14.3" x 3.5"
Water Capacity:
1.72 liters
Material:
Aluminum Alloy
Weight: 2lbs
Valve Inlet:
5/8"-18 UNF (C10)
Contents: 4 cu ft.
You can use any calibration gas cylinder as long as it has a C-10
connector.
Quad Gas Cylinder
Part#: MGC-Q-58 / MGC-Q-116
Contains 25 ppm H2S,
100 ppm CO,
18% O2,
& 50% LEL (2.5% vol Methane.)
AVAILABLE in 58L or 116L
100 ppm CO,
18% O2,
& 50% LEL (2.5% vol Methane.)
AVAILABLE in 58L or 116L
You can use any calibration gas cylinder as long as it has a C-10
connector.
Single Gas Cylinder - H2S
Part#: SGC-H2S-58 / SGC-H2S-116
Single Gas Cylinder - H2S - contains 25ppm H2S/N2 - Available in 58L or 116L
You can use any calibration gas cylinder as long as it has a C-10
connector.
Single Gas Cylinder - CO
Part#: SGC-CO-58 / SGC-CO-116
Single Gas Cylinder - CO - contains 100 ppm CO/Air - Available in 58L or 116L
You can use any calibration gas cylinder as long as it has a C-10
connector.
Single Gas Cylinder - O2
Part#: SGC-O2-58
Single Gas Cylinder - O2 - contains 18% O2.Available in 58L only
Chargers
Detector(s) sold separately.
Dock Charger replacement
Part#: DOCK-CHARGER
Dock charger replacement - std. 110v power supply (for all GCT Clip Docks)
Detector(s) sold separately.
MGC Vehicle Charger
Part#: MGC-CHARGER-V
MGC Vehicle Charger – 12v DC Adapter to use with Multi Gas Clip, MGC Pump and the External Pump
Detector(s) sold separately.
MGC Multi Charger
Part#: MGC-CHARGER-MULTI
MGC Multi Charger - 5 cable wall charger for use with: Multi Gas Clip (Infrared), MGC Pump (Infrared) and the External Pump
Detector(s) sold separately.
MGC Charger
Part#: MGC-CHARGER
MGC Charger replacement - 110v AC Adapter (for use with Multi Gas Clip Infrared & MGC Pump Infrared)
Detector(s) sold separately.
MGC Charger AU
Part#: MGC-CHARGER-AU
Replacement DC Power Adapter, MGC, 6V 1A Australia.
Detector(s) sold separately.
MGC Charger EU
Part#: MGC-CHARGER-EU
Replacement DC Power Adapter, MGC, 6V 1A Europe.
Detector(s) sold separately.
MGC Charger UK
Part#: MGC-CHARGER-UK
Replacement DC Power Adapter, MGC, 6V 1A United Kingdom.
GCT IR Link
*System Requirements: Available for Windows© based PCs (Vista, 7,
8.x, 10 64 bit versions)
GCT IR LINK communication module with USB cable
Part#: GCT-IR-LINK
GCT IR LINK communication module with USB cable (for use with all GCT detectors
GCT IR Link
USB Cable
USB Cable
Part#: GCT IR Link USB Cable
GCT IR Link USB Cable
Confined Space Kit
Detector(s) sold separately.
You can use any calibration gas cylinder as long as it has a C-10
connector.
Confined Space Kit with 58L Quad Gas
Part#: GCT-CSK-GAS
Hard sided carrying case with foam insert,
58L quad gas cylinder (25 ppm H2S, 100 ppm CO, 18% O2 & 50% LEL),
1' sampling probe, air stone particulate filter,
10' sampling hose, hand aspirator pump,
3' calibration/test hose with Quick Disconnect,
calibration caps (Multi Gas Clip & MGC Simple/Simple Plus),
0.5lpm regulator and GCT IR LINK.
Detector(s) sold separately.
Gas sold separately.
You can use any calibration gas cylinder as long as it has a C-10
connector.
Confined Space Kit
Part#: GCT-CSK
Hard sided carrying case with foam insert,
1' sampling probe,
air stone particulate filter,
10' sampling hose,
hand aspirator pump,
3' calibration/test hose with Quick Disconnect,
calibration caps (Multi Gas Clip & MGC Simple/Simple Plus),
0.5lpm regulator and GCT IR LINK.
MGC Hand Aspirator Kits
Detector(s) sold separately.
Hand Aspirator Kit for MGC Infrared
Part#: MGC-HAK
Hand Aspirator Kit for MGC Infrared - Probe, Stone Filter, Sampling Hose, Bulb & Calibration Cap (for use with MGC IR only)
MGC Probes
Detector(s) sold separately.
Remote Sampling Probe - 1ft.
Part#: PROBE-1
Remote Sampling Probe - 1 ft.
Detector(s) sold separately.
Telescoping Sampling Probe
Part#: PROBE-TS
Telescoping Sampling Probe (6 ft. fully extended).
Detector(s) sold separately.
Probe sold separately.
Neoprene Case For Use
With MGC PUMP /
Telescoping Probe Combo
With MGC PUMP /
Telescoping Probe Combo
Part#: MGC-PUMP-TSP-CASE
Neoprene case for MGC PUMP and Telescoping Telescoping Sampling Probe.
External Pump
Detector(s) sold separately.
External Pump
Part#: GCT-XP
The External Pump gives any Gas Clip diffusion detector the ability to take remote samples from up to 75 feet away, drawing air at greater than one foot per second, and comes with a two-year warranty.
Chargers
Detector(s) sold separately.
Dock Charger replacement
Part#: DOCK-CHARGER
Dock charger replacement - std. 110v power supply (for all GCT Clip Docks)
Detector(s) sold separately.
MGC Vehicle Charger
Part#: MGC-CHARGER-V
MGC Vehicle Charger – 12v DC Adapter to use with Multi Gas Clip, MGC Pump and the External Pump
Detector(s) sold separately.
MGC Multi Charger
Part#: MGC-CHARGER-MULTI
MGC Multi Charger - 5 cable wall charger for use with: Multi Gas Clip (Infrared), MGC Pump (Infrared) and the External Pump
Detector(s) sold separately.
MGC Charger
Part#: MGC-CHARGER
MGC Charger replacement - 110v AC Adapter (for use with Multi Gas Clip Infrared & MGC Pump Infrared)
Detector(s) sold separately.
MGC Charger AU
Part#: MGC-CHARGER-AU
Replacement DC Power Adapter, MGC, 6V 1A Australia.
Detector(s) sold separately.
MGC Charger EU
Part#: MGC-CHARGER-EU
Replacement DC Power Adapter, MGC, 6V 1A Europe.
Detector(s) sold separately.
MGC Charger UK
Part#: MGC-CHARGER-UK
Replacement DC Power Adapter, MGC, 6V 1A United Kingdom.
Gas Cylinders
When calibrating your monitors manually or with the SGC Dock, MGC Dock, or MGC Simple
Dock, use NIST traceable gas provided by Gas Clip Technologies in either 58 or 116 liter
bottles.
Gas Cylinder Info
58L Aluminum
Pressure: 500psi
Gas Type: See below
Dimensions:
14.25\" x 3.53"
Water Capacity:
1.72 liters
Material:
Aluminum Alloy
Weight: 1lb 12oz.
Valve Inlet:
5/8"-18 UNF (C10)
Contents: 2 cu ft.
Pressure: 500psi
Gas Type: See below
Dimensions:
14.25\" x 3.53"
Water Capacity:
1.72 liters
Material:
Aluminum Alloy
Weight: 1lb 12oz.
Valve Inlet:
5/8"-18 UNF (C10)
Contents: 2 cu ft.
116L Aluminum
Pressure: 1000psi
Gas Type: See below
Dimensions:
14.3" x 3.5"
Water Capacity:
1.72 liters
Material:
Aluminum Alloy
Weight: 2lbs
Valve Inlet:
5/8"-18 UNF (C10)
Contents: 4 cu ft.
Pressure: 1000psi
Gas Type: See below
Dimensions:
14.3" x 3.5"
Water Capacity:
1.72 liters
Material:
Aluminum Alloy
Weight: 2lbs
Valve Inlet:
5/8"-18 UNF (C10)
Contents: 4 cu ft.
You can use any calibration gas cylinder as long as it has a C-10
connector.
Quad Gas Cylinder
Part#: MGC-Q-58 / MGC-Q-116
Contains 25 ppm H2S,
100 ppm CO,
18% O2,
& 50% LEL (2.5% vol Methane.)
AVAILABLE in 58L or 116L
100 ppm CO,
18% O2,
& 50% LEL (2.5% vol Methane.)
AVAILABLE in 58L or 116L
You can use any calibration gas cylinder as long as it has a C-10
connector.
Single Gas Cylinder - H2S
Part#: SGC-H2S-58 / SGC-H2S-116
Single Gas Cylinder - H2S - contains 25ppm H2S/N2 - Available in 58L or 116L
You can use any calibration gas cylinder as long as it has a C-10
connector.
Single Gas Cylinder - CO
Part#: SGC-CO-58 / SGC-CO-116
Single Gas Cylinder - CO - contains 100 ppm CO/Air - Available in 58L or 116L
You can use any calibration gas cylinder as long as it has a C-10
connector.
Single Gas Cylinder - O2
Part#: SGC-O2-58
Single Gas Cylinder - O2 - contains 18% O2.Available in 58L only
GCT IR Link
*System Requirements: Available for Windows© based PCs (Vista, 7,
8.x, 10 64 bit versions)
GCT IR LINK communication module with USB cable
Part#: GCT-IR-LINK
GCT IR LINK communication module with USB cable (for use with all GCT detectors
GCT IR Link
USB Cable
USB Cable
Part#: GCT IR Link USB Cable
GCT IR Link USB Cable
Confined Space Kit
Detector(s) sold separately.
You can use any calibration gas cylinder as long as it has a C-10
connector.
Confined Space Kit with 58L Quad Gas
Part#: GCT-CSK-GAS
Hard sided carrying case with foam insert,
58L quad gas cylinder (25 ppm H2S, 100 ppm CO, 18% O2 & 50% LEL),
1' sampling probe, air stone particulate filter,
10' sampling hose, hand aspirator pump,
3' calibration/test hose with Quick Disconnect,
calibration caps (Multi Gas Clip & MGC Simple/Simple Plus),
0.5lpm regulator and GCT IR LINK.
Detector(s) sold separately.
Gas sold separately.
You can use any calibration gas cylinder as long as it has a C-10
connector.
Confined Space Kit
Part#: GCT-CSK
Hard sided carrying case with foam insert,
1' sampling probe,
air stone particulate filter,
10' sampling hose,
hand aspirator pump,
3' calibration/test hose with Quick Disconnect,
calibration caps (Multi Gas Clip & MGC Simple/Simple Plus),
0.5lpm regulator and GCT IR LINK.
MGC Hand Aspirator Kits
Detector(s) sold separately.
Hand Aspirator Kit for MGC Infrared
Part#: MGC-HAK
Hand Aspirator Kit for MGC Infrared - Probe, Stone Filter, Sampling Hose, Bulb & Calibration Cap (for use with MGC IR only)
MGC Probes
Detector(s) sold separately.
Remote Sampling Probe - 1ft.
Part#: PROBE-1
Remote Sampling Probe - 1 ft.
Detector(s) sold separately.
Telescoping Sampling Probe
Part#: PROBE-TS
Telescoping Sampling Probe (6 ft. fully extended).
Detector(s) sold separately.
Probe sold separately.
Neoprene Case For Use
With MGC PUMP /
Telescoping Probe Combo
With MGC PUMP /
Telescoping Probe Combo
Part#: MGC-PUMP-TSP-CASE
Neoprene case for MGC PUMP and Telescoping Telescoping Sampling Probe.